Ikelite AF35 Autoflash View full size

Ikelite AF35 Autoflash

The Most Simple Way To Add A Strobe 

 Remarks:please call for quote

More details

#4035

RM0.00

-15%

Key Features

Proprietary AutoFlash Wireless TTL Exposure
The AutoFlash built-in sensor transmits data from the camera's flash to the  AF35 strobe, varying the strobe's power automatically to replicate "TTL" exposure.  The AutoFlash system is designed to the camera's pre-flash sequence to fire the strobe at the  correct time and maximize output.
The AutoFlash sensor is positioned to provide the most reliable strobe triggering  possible without exposed cables which require maintenance and can tangle or break.
 
Ergonomic Design
Two large, easy to read dials provide all of the settings necessary for control of the flash system.  The AF35 strobe rear dial features OFF, Auto (TTL) plus six Manual Power settings.  The  AutoFlashsensor rear dial provides simple plus/minus EV exposure compensation in the Auto (TTL) mode. 
The system's comfortable rubberized grip and neutral buoyancy make it a pleasurable addition to any housing.  A flexible arm system allows quick repositioning of the strobe angle and adds no weight to the system.

A simple battery door is easy to remove and replace and provides a clear view of the o-ring seal. The  strobe's battery compartment is independently sealed from the electronics preventing further damage in  the event of a flood.

Dual AF35

Above picture shown with #4035 Primary and #4035.1 Secondary Kits

Specifications

Flash Recycle Time
3.5 seconds (shorter in fractional power settings)
Flash Guide #
28 ft (9 m) at ISO 100
Flash Angle of Coverage
70° (80° with diffuser)
Flash Color Temperature
5700K
Flash Modes
TTL, Full, 5 fractional powers in 1/2-stop increments
Modeling Light
No
Diameter
3.2 in (81 mm)
Length
4.7 in (119 mm)
Weight
20 oz (590 g)
Buoyancy
Approximately neutral
Depth Rating
300 ft (90 m)
Compatible Housings
Ikelite ULTRAcompact housings Ikelite housings with 12-24 mounting Most Canon, Olympus, Panasonic, Sony housings
Bulkhead
No
Fiber Optic
No
Slave
Built-in
Batteries
4 AA cells (Alkaline, NiMH, NiCad or Li-Ion)
Battery Door
9440.45
4035 Kit Supplied Accessories
Single Tray 9523.06 Mounting Kit 0561.2 Diffuser Deflector Kit
4035.1 Kit Supplied Accessories
Double Tray 9523.06 Mounting Kit 0561.2 Diffuser Deflector Kit

 

SCUBADIVING.COM REVIEW

"Ikelite’s Autoflash AF-35 is designed to replicate the auto exposure flash on a point-and-shoot camera. Just attach the tray to the bottom of the housing, load the light head with four double-As and start shooting. The Auto Flash Kit weighs only about two pounds including batteries, and is depth-rated to 300 feet. It’s compact, lightweight and easy to use. As a light source for a housed point-and-shoot camera, is hard to beat."