Mares SXS 62X Regulator Set

• Mares SXS 62X Regulator
• Mares SXS Octopus
• Mares Console Mission 2
• Seapro BC Inflator Rubber Hose (70cm)

FEATURES

• 2ND STAGE
  • OUR SMALLEST AND MOST COMPACT SECOND STAGE
  • MADE FROM ULTRALIGHT TECHNOPOLYMER
  • VAD SYSTEM WITH „CURVED“ BYPASS FOR THE HIGHEST AIR FLOW
  • LEFT AND RIGHT-SIDED USE
  • LATERAL EXHAUST TUBE FOR BETTER VISIBILITY IN ALL DIVING POSITIONS
  • EASY TO USE, SOFT PURGE BUTTON
  • SUPERFLEX HOSE

• 1ST STAGE
  • NATURAL DFC ON ALL LP PORTS. HIGH AIR FLOW AT ANY DEPTH
  • PRE-ORIENTED LP AND HP PORTS
  • AST – FIRST STAGE DRY SYSTEM TO AVOID WATER ENTRY
  • OUR MOST COMPACT 1ST STAGE WITH THE LIGHTEST DIAPHRAGM
  • PEARL CHROME FINISH

SPECIFICATIONS

• 1ST STAGE WEIGHT INT/DIN: 742g/525g
• 1ST STAGE HPP: 2 HP 7/16” UNF Ports
• 1ST STAGE LPP: 4 LP 3/8” UNF Ports
• 2ND STAGE WEIGHT: 156g / 5.5oz
• 2ND STAGE LP HOSE TYPE: SUPERFLEX HOSE / 75cm
• MATERIAL: ULTRALIGHT TECHNOPOLYMER

Mares SXS Octopus

FEATURES

• Mares smallest, Most compact second stage
• Cold water only
• Made from ultralight technopolymer
• V.AD. system with curved bypass for the highest air flow
• Left and right sided uses
• Lateral exhaust tube for better visibility in all diving positions
• Easy to use,Soft purge button
• Superflex uperflex octopus hose

Mares Console Mission 2

FEATURES
The main features of the Mission 2 dive gauge are:

• New modular design
• New, easy-to-read display
• Brass case
• Technopolymer window
• Phosphorescent dial

The main features of the Mission 2 depth gauge are:

• Phosphorescent dial
• Oil-immersed
• Maximum depth hand
• Linear scale

The main features of the Mission 2 console are:

• Protective rubber console
•  Multiple hook-up points

Seapro LPI BC Inflator Rubber ML Hose (70cm)

FEATURES

• High tenacity polyester chemically bonded to the inner tube.
• The particular structure of this type of LP rubber hose allows to avoid flow falls: in fact also forming a very narrow curvature, no record of flow falls.
• The surface external smooth whip creates excellent sliding even when in contact with the rest of ‘equipment and discriminate friction that could cause folds or premature wear.
• All hoses are 100% tested by an operator.
• Each production batch receives the green light to producing after having passed the tests of traction regulations and burst strength.

SPECIFICATIONS

• Internal diameter: 6.4 +/- 0.15 mm
• Outer diameter: 12 mm +/- 0.20
• Working pressure: 35 bar
• Minimum bursting pressure: 150 bar
• Minimum working temperature -20 / + 70 ° C