Insta360 X3 Sticky Lens Guard

Description

• Size: 37.5x36x2.8mm (1.5×1.4×0.1in)
• Compatibility: X3
• Weight: 0.9g (0.03oz)
• Material: Polyacetal (POM)
• Lens Guard size: 32x30x9.3mm (1.3×1.2×0.3in)
• Lens Guard weight: 1g (0.03oz)
• Lens Guard material: Acrylic (PMMA)

In the Box:

• 2x Lens Guards
• 1x Front Lens Base
• 1x Rear Lens Base
• 1x Lens Cloth
• 1x Removal Tool
• 2x Front Lens Double-Sided Adhesive
• 2x Rear Lens Double-Sided Adhesive

Notes:

1. Press the Lens Guards down firmly when installing.
2. Enable “Lens Guard Mode” when using the Lens Guards and turn it off after removing them.
3. Dirty or worn Lens Guards may affect the final image result.
4. Avoid using the Lens Guards in water or rain due to the non-sealed structure.
5. To avoid fogging, dry the Lens Guards thoroughly with a soft cloth if they get wet from water, snow or fog.
6. If you need to replace the double-sided adhesive, remove the base with the removal tool, clean the residual adhesive, replace it with new double-sided adhesive and reinstall the base.